memory-fullDCP-L2550DW

Brother DCP-L2550DW Memory Full Error: How to Fix

The Brother DCP-L2550DW Memory Full error informs you that the internal printer memory capacity has been reached. This typically happens when processing documents that are too large for the allocated RAM, such as complex PDFs or high-res graphics. Clearing the print queue is the standard solution to restore normal performance.

0 views

Common causes

  • 1Sending documents with excessive graphical resolution.
  • 2Queue backup due to network congestion.
  • 3Corrupted print spooler file on host computer.
  • 4Exceeding the max RAM buffer capacity with one single file.

Solutions

Rapid Diagnosis

The Memory Full message is visible on the printer's LCD screen. If you have multiple devices printing at once, one of them may have sent a document too complex for the buffer.

Step-by-Step Solution

  1. Cancel Button: Press 'Cancel' on the control panel until the printing stops.
  2. Clear PC Spooler: On your computer, open 'Devices and Printers', right-click the Brother unit, and purge the print queue.
  3. Power Down: Fully turn off the unit for 30 seconds to wipe the RAM.
  4. Restart: Turn it back on and wait for the status to return to 'Ready'.

Prevention and Maintenance

Always check document size before printing. Keep the printer software and firmware updated to ensure optimal RAM utilization during large batch tasks.

When to Call a Technician

If the error occurs immediately upon startup with no pending documents, the motherboard RAM chip may be damaged and requires hardware repair.

Equipment Technical Data

  • Technology: Monochrome Laser
  • Speed: 36 ppm
  • Connectivity: Wireless, Ethernet, USB
  • Compatible Consumables: Brother TN-730/TN-760 Toner, DR-730 Drum
  • Recommended Use: Home office, small workgroups
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Cancel Jobs

    Press the Cancel button on the printer panel to halt pending tasks.

  2. 2

    Clear Print Spooler

    Cancel all pending print jobs on your computer system.

  3. 3

    Reboot

    Power off and on to clear the printer's RAM.

Frequently asked questions

The printer's RAM is overloaded by large files, high-resolution graphics, or a backlog of print tasks.

Yes, the printer will remain unresponsive to any new requests until memory is freed.

It uses TN-730/TN-760 toner cartridges and the DR-730 drum unit.

Avoid sending multiple large documents at once and consider reducing the document print quality.