L110ScanSnap iX1400

Fujitsu ScanSnap iX1400 Error L110: Maintenance Alert

The Fujitsu ScanSnap iX1400 error L110 is a maintenance counter indicating that the feed rollers have reached their specified lifespan. It is not a hardware fault, but an automated alert to help users proactively replace components before feed issues or jams occur. Replacing the kit is essential for keeping your high-speed workflow reliable.

1 views

Common causes

  • 1Internal page counter limit reached.
  • 2Natural rubber degradation over heavy usage.
  • 3Excessive dust inhibiting roller grip.
  • 4Sensor fault triggering early maintenance warning.

Solutions

Diagnóstico rápido

L110 appears once you exceed the pre-set count of scanned pages. If you ignore this and keep scanning, you will likely encounter frequent paper feeding issues.

Solución paso a paso

  1. Purchase the official roller kit for the iX1400.
  2. Open the scanner compartment and swap the old rollers for the new ones.
  3. Run ScanSnap Home to reset the consumable counter after hardware installation.

Prevención y mantenimiento

Keep the paper path free of debris and perform light cleaning regularly to extend roller life between kit replacements.

Cuándo llamar a un técnico

If the error continues after a fresh installation and counter reset, the sensor board should be checked.

Ficha técnica del equipo

  • Technology: Duplex scanner
  • Speed: 40 ppm
  • Consumibles: iX1400 Roller Kit
  • Recommended Use: Heavy document scanning
  • Drivers / official firmware

Steps to follow

  1. 1

    Buy kit

    Get official Fujitsu spare parts.

  2. 2

    Install

    Swap the worn rollers for the new ones.

  3. 3

    Reset counter

    Clear the maintenance log in the software.

Frequently asked questions

It is a scheduled maintenance alert telling you to replace the worn rollers.

You can continue, but you will risk frequent document jams.

Generally 200,000 scans, but this varies based on usage environment.

Yes, original parts ensure optimal mechanical feeding.