JAM-TRAYHL-2280DW

Brother HL-2280DW Tray Paper Jam Fix

Brother HL-2280DW tray jam error signals an obstruction during the paper intake process. Why does my Brother HL-2280DW show tray jam? Usually, this occurs due to misaligned paper guides or dust buildup on the feed rollers. Following these steps clears the issue quickly.

1 views

Common causes

  • 1Misaligned paper guides.
  • 2Worn or dirty rubber pickup rollers.
  • 3Overfilled paper tray.
  • 4Incompatible paper stock.

Solutions

Diagnóstico rápido

The error appears if the paper sensor cannot detect the intake. Look for crumpled paper at the entrance of the main tray assembly.

Solución paso a paso

  1. Pull Out: Slide the paper tray fully out.
  2. Clear: Carefully remove any paper remnants.
  3. Reset: Re-align your paper stack and ensure the tray is fully seated.

Prevención y mantenimiento

Fan the paper before loading to prevent double-feeding. Clean the visible feed roller with a damp cloth if you notice persistent feeding trouble.

Cuándo llamar a un técnico

If removing the tray and clearing the area doesn't fix it, internal sensors might be blocked by paper scraps, requiring a technician's inspection.

Ficha técnica del equipo

  • Technology: Laser printer.
  • Tray Capacity: 250 sheets.
  • Speed: 27 ppm.
  • Consumible: TN-450 / DR-420.
  • Use Case: Small Office.
  • Official Drivers / Firmware

Frequently asked questions

Remove the tray, check the path for debris, and re-align your paper stack.

It is quite common if the tray guides are not set exactly to the paper size.

Always use genuine TN-450 cartridges for the best results.

Do not exceed the maximum fill mark on your paper tray.

Brother HL-2280DW Tray Paper Jam Fix | Vimazdev