j-0003TASKalfa 1802i

Kyocera TASKalfa 1802i error j-0003: Help

The Kyocera TASKalfa 1802i error j-0003 occurs when the input tray fails to feed paper into the internal transport system. It is commonly triggered by worn pickup rollers or paper that is misaligned in the drawer. Identifying why does Kyocera TASKalfa 1802i show error j-0003 is the first step in restoring document production.

1 views

Common causes

  • 1Worn rubber rollers.
  • 2Misaligned paper guides.
  • 3Dust accumulation.
  • 4Overfilled input tray.

Solutions

Diagnostic

If you see this error, check if the printer tries to feed paper and fails. Look for paper debris inside the drawer housing.

Troubleshooting Steps

  1. Remove tray: Slide the input tray completely out.
  2. Inspect area: Clear any debris or torn paper.
  3. Clean rollers: Wipe the feed rollers with distilled water.
  4. Adjust guides: Ensure the paper guides fit the paper width.

Maintenance

Limit tray fill to the designated max line. Regularly cleaning rollers extends their life significantly.

When to call a technician

If rollers are cleaned and paper is set correctly, but the error persists, there may be an issue with the clutch or motor sensor.

Equipment specs

  • Technology: Laser
  • Speed: 18 cpm
  • Connectivity: USB
  • Input: 400 sheets
  • Toner: TK-4105
  • Paper: 64-105g/m2
  • Support

Steps to follow

  1. 1

    Remove tray

    Slide the input tray completely out.

  2. 2

    Inspect area

    Clear any debris or torn paper.

  3. 3

    Clean rollers

    Wipe the feed rollers with distilled water.

  4. 4

    Adjust guides

    Ensure the paper guides fit the paper width.

Frequently asked questions

It means the printer cannot pick up paper from the main tray, usually because rollers are slick with dust.

Repairing this prevents persistent paper jam damage.

Standard 80g weight is ideal. Avoid heavy stock.

Clean the pickup rollers monthly to avoid paper dust buildup.

Kyocera TASKalfa 1802i error j-0003: Help | Vimazdev