i-01WorkForce Pro WF-C879Rx
Epson WorkForce Pro WF-C879Rx error I-01 Fix
The Epson WorkForce Pro WF-C879Rx error I-01 is a proactive status notification indicating that a maintenance part is nearing exhaustion. Usually, this refers to the waste ink tank which collects residue. Understanding this error code prevents potential spills and production downtime.
1 views
Common causes
- 1Maintenance box reaching capacity limit.
- 2Internal waste ink counter threshold met.
- 3Sensor failure inside the waste ink compartment.
- 4Improper installation of the maintenance box.
Solutions
Diagnóstico rápido
This code displays on the control panel to warn you that the maintenance box is nearly full. It does not immediately stop production, but prompts for action.Solución paso a paso
- Purchase: Obtain a new C9382 maintenance box.
- Locate: Open the designated maintenance access door.
- Replace: Swap the used box for a new one, handling carefully.
- Reset: Ensure the system registers the new component via the menu.
Prevención y mantenimiento
Regularly check the waste ink level via the web interface. Replace the box before it reaches 100% capacity to prevent internal printer contamination.Cuándo llamar a un técnico
If the error code remains visible after installing a new maintenance box, the printer's internal sensor circuit may require expert evaluation.Ficha técnica del equipo
- Technology: PrecisionCore Inkjet
- Speed: Up to 26 ppm
- Connectivity: Ethernet, Wi-Fi, USB
- Compatible consumables: C9382 maintenance box
- Recommended use: Professional work environments
- Drivers / official firmware
Frequently asked questions
It is an informational alert that a maintenance component, likely the waste ink box, is near its end-of-life.
Yes, printing is allowed, but you should replace the maintenance box as soon as possible to avoid leaks.
You need the C9382 maintenance box.
Check the status via the printer's Web Config interface.