Epson EcoTank ET-2850 error I-01: Maintenance Guide
The Epson EcoTank ET-2850 error I-01 is an informational notice regarding a mismatch between software-defined paper size and the physical tray detection. It helps ensure quality prints and avoids potential feed jams.
Common causes
- 1Incorrectly positioned paper guides.
- 2Software/hardware setting mismatch.
- 3Unsupported paper size loaded.
- 4Dust on the width sensor.
Solutions
Diagnóstico rápido
The I-01 code notifies the user of a configuration conflict. It is a user-adjustable setting rather than a machine fault.Solución paso a paso
- Guide adjustment: Ensure the side guides fit the paper edges snugly.
- Settings: Check printer driver properties to match the paper dimensions.
- Loading: Push the paper until it stops.
- Confirmation: Hit OK on the control panel.
Prevención y mantenimiento
Don't overfill the paper tray. Dusting the tray ensures sensor accuracy.Cuándo llamar a un técnico
If the error persists despite correct settings, the paper size sensor may need inspection.Ficha técnica del equipo
- Technology: Color Inkjet.
- Speed: 10 ppm.
- Connectivity: Wi-Fi, USB.
- Capacity: 100-sheet tray.
- Consumible: T522 original.
- Usage: Home/Office.
- Official drivers / firmware
Steps to follow
- 1
Adjust guides
Slide the rear paper guides to fit the width of the paper stack.
- 2
Configure size
Ensure the printer driver settings match the loaded paper size.
- 3
Confirm
Press 'OK' on the printer display to proceed with the job.
Frequently asked questions
This appears when the paper size configured in the print dialog doesn't match the size detected in the tray.
Yes, but it may cause alignment issues or truncated prints; correctly matching settings is best.
Standard 75g bond paper is ideal. Extremely thin or heavy papers may trigger detection errors.
Regularly cleaning the tray area prevents paper dust from interfering with width sensors.