Head Temperature ErrorFTP-64K

Fix Fujitsu FTP-64K Head Temperature Error - Tech Guide

The temperature error on the Fujitsu FTP-64K series indicates the thermal head sensor has exceeded safe operating limits. This safety state triggers to protect internal hardware from failure. Stopping print jobs is essential to allow the system to cool down properly.

1 views

Common causes

  • 1Excessive, continuous printing cycles.
  • 2Debris buildup affecting the thermal head sensor.
  • 3Blocked ventilation paths within the housing.

Solutions

Forced Cooling

  1. Shut down the printer immediately.
  2. Unplug the power cable from the source.
  3. Wait at least 15 minutes in a cool area.
  4. Restart and perform a test print.

Environmental Check

  1. Ensure the printer is away from external heat sources.
  2. Clean the air vents using compressed air.

Steps to follow

  1. 1

    Power Off

    Switch off the unit and remove all cables.

  2. 2

    Clear Vents

    Remove dust using a soft brush or compressed air.

  3. 3

    Cool Down

    Leave the printer inactive for 15 minutes before rebooting.

Frequently asked questions

No, continuing to print may cause irreversible hardware damage to the thermal printhead.

Usually, this indicates a blocked ventilation path or a failing thermal sensor within the printer.

It is not recommended. If the error persists after cleaning, professional service is required.

Fix Fujitsu FTP-64K Head Temperature Error - Tech Guide | Vimazdev