head-tempDL3860

Fujitsu DL3860 error head-temp: Thermal Overload Fix

The Fujitsu DL3860 error head-temp is a safety mechanism triggered when the print head exceeds operational temperature limits. Why does my fujitsu dl3860 show temp error? It usually happens during intensive print jobs. Letting the machine rest is the best fix.

1 views

Common causes

  • 1High-speed continuous printing.
  • 2Blocked airflow.
  • 3High ambient temperatures.
  • 4Degraded print head thermal sensor.

Solutions

Diagnóstico rápido

The printer stops cold. Check the panel for temperature-related messages indicating a thermal block.

Solución paso a paso

  1. Stop printing immediately.
  2. Power off the printer.
  3. Rest for 20 minutes in a cool room.
  4. Clean the air vents.
  5. Restart operation.

Prevención y mantenimiento

Keep the printer out of direct sunlight and in a climate-controlled office to prevent thermal buildup.

Cuándo llamar a un técnico

If the head stays hot or the error appears at startup, the thermistor may be faulty.

Ficha técnica del equipo

  • Technology: 24-pin Matrix
  • Speed: 480 cps
  • Protection: Thermal thermistor
  • Consumable: DL-Series Ribbon
  • Use case: Heavy-duty printing
  • Drivers / firmware official

Steps to follow

  1. 1

    Stop

    Halt printing immediately.

  2. 2

    Cool down

    Let the device rest for 15-20 minutes.

  3. 3

    Clean vents

    Ensure airways are free of dust.

  4. 4

    Restart

    Power on once unit is cool.

Frequently asked questions

The thermal sensor has tripped due to excessive print head temperatures from long operation periods.

No, it acts as a safety barrier. Forcing the printer might lead to permanent head damage.

Genuine DL series ribbons are recommended to maintain low friction during high-speed printing.

Maintain a regular work cycle with breaks and keep the printer in a well-ventilated area.