F245ECOSYS P5026cdw

Fix Network Error F245 on Kyocera ECOSYS P5026cdw

The F245 error code on the Kyocera ECOSYS P5026cdw indicates a communication failure over the network protocol, usually tied to issues with the Network Interface Card (NIC) or incompatible TCP/IP configurations. This is common in office environments with dynamic IP assignment or protocol conflicts. Resolving it requires verifying local network settings.

1 views

Common causes

  • 1IP address conflict with other devices on the same subnet.
  • 2Internal network card misconfigured with incorrect gateway settings.
  • 3Temporary failure of the switch or router in handling dynamic requests.

Solutions

Resetting Network Settings

  1. Access the printer menu via the control panel.
  2. Navigate to Network Settings.
  3. Select 'Network Reset' to revert to factory networking defaults.

Physical and Protocol Check

  1. Ensure the Ethernet cable is securely connected.
  2. Set a static IP address to avoid DHCP allocation conflicts.

Steps to follow

  1. 1

    Check physical cables

    Verify the Cat5e or better cable is undamaged.

  2. 2

    Set static IP

    Manually assign a static IP address outside the common DHCP pool.

  3. 3

    Power cycle network

    Reboot both the router and the printer to refresh connection handles.

Frequently asked questions

It is mainly caused by a failure in the network layer during data transmission or IP address assignment.

Yes, F245 only affects network connectivity; direct USB printing is typically unaffected.

Rarely. It is usually fixed by reconfiguring the printer's TCP/IP protocol.