error-60MFC-J1010DN

Fixing Brother MFC-J1010DN Error 60: Troubleshooting Guide

The Brother MFC-J1010DN error 60 indicates a mechanical blockage or motor failure within the device. This error typically occurs when the print head movement is obstructed by paper debris or sensor failure. Why does my Brother MFC-J1010DN show error 60? It is often a result of accumulation of dust on the encoder strip or a paper jam in the internal feed unit.

0 views

Common causes

  • 1Debris obstructing the print head carriage track.
  • 2Sensor misalignment due to internal dust accumulation.
  • 3Tension issues in the motor drive belt.
  • 4Voltage fluctuations affecting the motor control circuit.

Solutions

Quick Diagnosis

If the printer displays error 60, look for unusual mechanical noises or a complete stall during the startup cycle. A grinding sound often points to a physical blockage in the carriage rail.

Step-by-Step Solution

  1. Power Off: Disconnect the power cable entirely.
  2. Inspect Carriage: Carefully check the print head path for debris.
  3. Clear Obstructions: Remove any torn paper bits found.
  4. Reconnect: Restart the device to recalibrate.

Prevention and Maintenance

Use only standard weight paper and clean the feed rollers periodically. Original Brother ink cartridges are designed to minimize print head clogs that lead to motor fatigue.

When to Call a Technician

If the error persists after clearing debris and power cycling, the motor or logic board might be faulty, requiring professional repair.

Technical Specifications

  • Technology: Color Inkjet
  • Print Speed: Up to 17 ppm (mono)
  • Connectivity: Wi-Fi and USB
  • Feeding Capacity: 150 sheets
  • Compatible Consumables: LC401 ink series
  • Recommended Use: Home/SOHO
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Power Cycle

    Disconnect the power cord for 60 seconds to discharge the printer's internal memory.

  2. 2

    Check for Debris

    Open the rear tray and ensure no paper scraps are blocking the path.

  3. 3

    Restart

    Reconnect the printer directly to a wall outlet and turn it on.

Frequently asked questions

This code signifies a mechanical failure or blockage preventing the print head or motor from moving.

It is a medium-severity error that often responds to simple cleaning but may indicate hardware damage.

It uses the LC401 ink series. Always prioritize original cartridges to maintain hardware health.

Maintain a clean paper path and perform regular roller cleaning every three months.

Fixing Brother MFC-J1010DN Error 60: Troubleshooting Guide | Vimazdev