error-543MC562dn

OKI MC562dn error 543: Registration Issues

The OKI MC562dn error 543 is related to the paper registration system. It triggers when paper fails to hit the sensor in the allowed timeframe. Resolving error 543 on MC562dn typically involves checking tray loading and cleaning rollers.

1 views

Common causes

  • 1Incorrect guides: Paper misaligned in tray.
  • 2Dirty roller: Loss of grip.
  • 3Incompatible paper: Grammage out of spec.
  • 4Defective clutch: Mechanical synchronization failure.

Solutions

Diagnóstico rápido

If prints look skewed or the system reports 'Registration Error', code 543 is likely. Check if the paper sits correctly in the tray.

Solución paso a paso

  1. Remove the paper tray.
  2. Adjust guides to hold paper snugly without buckling.
  3. Wipe the registration roller (behind tray) with isopropyl alcohol.
  4. Ensure paper is within supported specs.
  5. Print a test page.

Prevención y mantenimiento

Clean feed rollers every 3 months. Keep paper dry to prevent consistency issues.

Cuándo llamar a un técnico

If cleaning the rollers doesn't help, the registration clutch might be worn out and need replacement.

Ficha técnica del equipo

  • Technology: Digital LED
  • Speed: 26 ppm
  • Registration: Tray adjustable
  • Consumibles: OKI MC562 Series
  • Recommended use: Office
  • Official drivers / firmware

Steps to follow

  1. 1

    Align paper

    Check the tray guides.

  2. 2

    Clean roller

    Clean the registration roller with isopropyl alcohol.

  3. 3

    Test print

    Run a test page to verify alignment.

Frequently asked questions

The paper doesn't reach the registration sensor in time.

It is a minor alignment failure, but printing stops for safety.

Not directly, but genuine parts ensure better mechanical sync.

Clean feed rollers every 3 months.