error-200MC160

OKI MC160 error 200: Troubleshooting Guide

The OKI MC160 error 200 indicates a communication failure within the scanner unit or the main system processor. This error blocks scanning and copying tasks during the unit's initialization sequence, often triggered by power instability or memory corruption.

0 views

Common causes

  • 1Scanner lamp initialization failure.
  • 2Corrupt firmware on the controller board.
  • 3Scanner motor drive failure.
  • 4Electrical interference in system wiring.

Solutions

Diagnóstico rápido

The error appears upon startup or when initiating a scan job. If the scanner carriage remains stationary, suspect a hardware initialization issue.

Solución paso a paso

  1. Power off and disconnect the unit completely.
  2. Inspect the scanner glass for any physical obstructions.
  3. Flash the printer firmware via the web interface or control panel.
  4. Perform a factory reset if the error persists.

Prevención y mantenimiento

Use a surge protector for the printer to prevent damage to internal boards. Clean the scanner glass regularly with soft, lint-free materials.

Cuándo llamar a un técnico

If the reset fails to clear the error, the scanner board or motor is likely failing, necessitating professional repair.

Ficha técnica del equipo

  • Technology: LED Multilaser
  • Print speed: Up to 20 ppm color
  • Connectivity: USB, Ethernet
  • Feed capacity: 250-sheet tray
  • Compatible consumables: OKI MC160 Toner/Drum series
  • Recommended use: Small office / Home office
  • Official drivers / firmware

Steps to follow

  1. 1

    Power cycle

    Turn the printer off and unplug for 10 minutes to clear volatile memory.

  2. 2

    Update firmware

    Check the manufacturer support page for the latest firmware release.

  3. 3

    Check connections

    Inspect all data cables for signs of physical damage or loose connections.

  4. 4

    Internal test

    Perform a standalone copy to verify if the scanner lamp initializes.

Frequently asked questions

This error typically points to a communication timeout between the main controller and the scanner module.

It restricts scanning and copying, though printing features may remain operational.

Always stick to original OKI toners to ensure sensor accuracy and print quality.

Keep the glass surface clean of dust and update firmware as recommended by OKI.