error-120MC160

OKI MC160 error 120: Technical Fix

The OKI MC160 error 120 alerts the user to a failure or blockage in the main motor of the device. This fault prevents the rollers and toner transport system from moving. This printer is built to offer consistent quality for busy office environments.

1 views

Common causes

  • 1Mechanical blockage in the tray.
  • 2Hardened toner debris on rollers.
  • 3Controller board failure.
  • 4Gear teeth erosion.

Solutions

Quick Diagnosis

If the error occurs during the printer warm-up phase, the issue is typically physical resistance stopping the motor rotation.

Step-by-Step Solution

  1. Power reset: Power off and unplug the unit for 5 minutes.
  2. Paper check: Check for any obstructions in the paper path.
  3. Rotation test: Ensure rollers rotate freely.
  4. Restart: Power on and test a print.

Prevention and Maintenance

Avoid overstuffing paper trays. Perform monthly roller cleanings to prevent build-up.

When to Call a Technician

If the motor makes grinding noises after resetting, professional repair is required.

Device Technical Data

  • Technology: Digital LED
  • Speed: 20 ppm
  • Connectivity: USB 2.0
  • Feeding: 350 sheets
  • Consumable: MC160 Toner Series
  • Use Case: Small Office
  • Official support

Steps to follow

  1. 1

    Power reset

    Power off and unplug the unit for 5 minutes.

  2. 2

    Paper check

    Check for any obstructions in the paper path.

  3. 3

    Rotation test

    Ensure rollers rotate freely.

  4. 4

    Restart

    Power on and test a print.

Frequently asked questions

This code indicates a main motor communication failure.

Physical jams can be cleared, but motor failure requires repair.

Uses original MC160 toner series.

Regular cleaning prevents mechanical stress on the motor.

OKI MC160 error 120: Technical Fix | Vimazdev