error-060C5650dn

OKI C5650dn error 060: Temperature Failure

The OKI C5650dn error 060 indicates an inconsistency in the fuser unit temperature. The fuser may fail to heat up properly or have detected a temperature spike outside safety limits. A cooling period is essential before any inspection.

1 views

Common causes

  • 1Fuser failed to reach temp
  • 2Overheating due to blocked fan
  • 3Defective thermistor
  • 4Unstable grid voltage

Solutions

Diagnóstico rápido

The 060 error prevents the printer from completing its warm-up cycle. If the machine feels hot to the touch, the ventilation system might be failing.

Solución paso a paso

  1. Turn off and unplug.
  2. Leave to cool for 30 minutes.
  3. Verify clear air vents.
  4. Reconnect and start.

Prevención y mantenimiento

Avoid continuous high-quality printing if not needed. Keep the environment ventilated.

Cuándo llamar a un técnico

If the error occurs immediately upon startup (while cold), the fuser thermistor is damaged and needs replacement.

Ficha técnica del equipo

  • Technology: Digital LED
  • Consumibles: C5650 series
  • Maintenance: Annual fan cleaning
  • Official Drivers

Steps to follow

  1. 1

    Cool Down

    Turn off the equipment and wait at least 30 minutes.

  2. 2

    Ventilation

    Ensure the air exhaust is not blocked.

  3. 3

    Verification

    Power on and observe if the error clears after heating.

Frequently asked questions

This error signals the fuser hasn't reached the correct temperature or is overheating.

Yes, the fuser is a critical part that requires precise temperature.

Using appropriate paper and proper ventilation.

Original OKI to prevent thermal residue.