error-050MC562dn

OKI MC562dn error 050: Paper Jam Fix

The OKI MC562dn error 050 is a common paper feed or jam notification. It occurs when a sheet of paper or debris interrupts the printer's path sensors. Solving error 050 on MC562dn requires careful clearing of all paper paths.

1 views

Common causes

  • 1Low-weight paper: Thin sheets wrinkle easily in the fuser.
  • 2Incorrect tray settings: Guides cause skewing.
  • 3Roller wear: Feed rollers lose grip.
  • 4Obstructions: Staples or debris in the paper path.

Solutions

Diagnóstico rápido

The device will show 'Paper Jam' or 'Error 050'. Look for fragments of paper around the fuser or the main tray area.

Solución paso a paso

  1. Turn off the printer and open the back cover.
  2. Check the fuser area for stuck paper.
  3. Gently pull any blocked sheets out.
  4. Check the main tray for proper adjustment.
  5. Close covers and restart the device.

Prevención y mantenimiento

Avoid damp or dusty paper. Clean the pickup rollers periodically. Use only high-quality transfer materials to avoid debris buildup.

Cuándo llamar a un técnico

If jams persist despite no paper being stuck, the sensor array might be misaligned or faulty.

Ficha técnica del equipo

  • Technology: Digital LED
  • Speed: 26 ppm color
  • Connectivity: USB/Network
  • Capacity: 350 sheets
  • Consumibles: OKI MC562 Series
  • Recommended use: High-demand office
  • Official drivers / firmware

Steps to follow

  1. 1

    Open trays

    Remove the paper tray and open the rear cover.

  2. 2

    Remove paper

    Gently pull out any jammed paper.

  3. 3

    Reset

    Close covers and restart the machine.

Frequently asked questions

This code indicates a paper jam blocking the internal sensor path.

Yes, printing operations are halted until the obstruction is cleared.

Worn feed rollers and degraded transfer belts are common culprits.

Use standard-weight paper and don't overload trays.