error-050C5650dn

OKI C5650dn error 050: Paper Sensor Fault

The OKI C5650dn error 050 indicates that a paper presence sensor along the feed path is blocked or falsely detecting an object. Frequently, small paper fragments or excess dust interfere with the sensor, continuously triggering the alert. Manual cleaning is typically effective.

0 views

Common causes

  • 1Paper scraps blocking sensor
  • 2Excess dust in path
  • 3Mechanically jammed sensor flag
  • 4Overly thick media

Solutions

Diagnóstico rápido

The 050 error occurs when the printer, despite having no paper, believes there is an internal jam. Inspect rollers for tiny scraps of paper.

Solución paso a paso

  1. Open all printer doors.
  2. Use compressed air to clean sensors.
  3. Remove any paper scraps.
  4. Close and reboot.

Prevención y mantenimiento

Avoid printing on damp or excessively thick paper. Keep the printer dust-free.

Cuándo llamar a un técnico

If the 050 error persists after clearing paths, the mechanical sensor flag might be internally jammed.

Ficha técnica del equipo

  • Technology: Digital LED
  • Consumibles: C5650 series
  • Feed: Standard + Manual tray
  • Official Drivers

Steps to follow

  1. 1

    Path Inspection

    Open rear and side doors to check for jams.

  2. 2

    Sensor Cleaning

    Blow away dust in the paper path area.

  3. 3

    Reboot

    Power off and on after checking paths.