error-016Phaser 3320DNI

Xerox Phaser 3320DNI error 016: How to fix network

The Xerox Phaser 3320DNI error 016 is a network-related code signaling a break in communication between the printer and the office network. Why is my Xerox Phaser 3320DNI showing error 016? This usually occurs due to an IP conflict or hardware cabling issue. Follow our steps to troubleshoot and restore connectivity.

1 views

Common causes

  • 1IP address conflict within the network.
  • 2Damaged or loose Ethernet cabling.
  • 3Incorrect gateway or subnet configuration.
  • 4Incompatibility with the network switch auto-negotiation.

Solutions

Diagnóstico rápido

The error 016 manifests as a dead connection. How to fix network error 016 on Xerox Phaser? Start by verifying the link light status on the printer's Ethernet port.

Solución paso a paso

  1. Reboot router: Power cycle your router and the printer to reset network states.
  2. Inspect cabling: Check that the Ethernet cable is firmly plugged into the LAN port.
  3. Set static IP: Enter the network settings menu and configure a valid static IP address.
  4. Verify connectivity: Print a configuration report to confirm the network status is active.

Prevención y mantenimiento

Use high-quality shielded Ethernet cables. Assign static IP addresses to printer devices to avoid issues during router restarts. Keep firmware updated.

Cuándo llamar a un técnico

If all network settings are correct and cables are replaced, but the error persists, the network interface card inside the machine may be faulty.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Performance: 35 ppm
  • Connectivity: Gigabit Ethernet, USB, Wi-Fi
  • Capacity: 250 sheets standard
  • Consumables: Xerox 3320 series cartridges
  • Usage: Corporate environments
  • Drivers / firmware official

Steps to follow

  1. 1

    Reboot router

    Power cycle your router and the printer to reset network states.

  2. 2

    Inspect cabling

    Check that the Ethernet cable is firmly plugged into the LAN port.

  3. 3

    Set static IP

    Enter the network settings menu and configure a valid static IP address.

  4. 4

    Verify connectivity

    Print a configuration report to confirm the network status is active.

Frequently asked questions

Error 016 is a network communication error indicating the printer has lost its connection to the host network.

Yes, if you need to print over the network. It's usually a quick fix within the printer settings.

No, toner is for printing; network errors are strictly configuration-related.

Update firmware when encountering repeated network faults to ensure compatibility with modern protocols.

Xerox Phaser 3320DNI error 016: How to fix network | Vimazdev