error-0100ZD500R Plus

Zebra ZD500R Plus error 0100: RFID Failure

The Zebra ZD500R Plus error 0100 is a critical failure in the device's RFID encoding. It appears when the printer is unable to read or write to the chip contained within the label. Checking label positioning and antenna power intensity is the recommended first step.

1 views

Common causes

  • 1Defective or unsupported RFID tag
  • 2Antenna misaligned with tag
  • 3Insufficient RFID power
  • 4Locked chip

Solutions

Diagnóstico rápido

The 0100 error triggers immediately after attempting to print and encode an RFID tag. Check if the tag is correctly aligned with the internal antenna.

Solución paso a paso

  1. Verify the label is centered correctly.
  2. Check if the tag type is supported by the ZD500R.
  3. Increase RFID write power slightly in settings.
  4. Run a material calibration.

Prevención y mantenimiento

Use only Zebra-certified consumables to ensure RFID chip alignment. Keep the printhead clean.

Cuándo llamar a un técnico

If the error persists across different label rolls, the internal RFID antenna might be physically damaged.

Ficha técnica del equipo

  • Technology: RFID / Direct Thermal
  • Consumibles: RFID labels compatible with ZD500R
  • Connectivity: USB, Ethernet, Wi-Fi
  • Official Drivers

Frequently asked questions

The error occurs when the printer cannot correctly encode the paper's RFID inlay.

No, you must use tags compatible with the printer's frequency.

Adjust the RFID power setting in the printer's configuration menu.

Regular cleaning with isopropyl alcohol to maintain print quality.