error-01ES9160 MFP

OKI ES9160 MFP Enterprise Error 01: Troubleshooting

The OKI ES9160 MFP Enterprise error 01 is a common incident that happens during system initialization, typically linked to invalid network configurations or port conflicts. This notice stalls firmware loading, preventing the unit from entering operational mode. It is crucial to diagnose if the error 01 in ES9160 arises from an incorrect router configuration or an internal communication board failure.

1 views

Common causes

  • 1IP Conflict: Assigned IP is already in use by another node.
  • 2Network Failure: Gateway or DNS settings are inaccessible during boot.
  • 3Firmware Corruption: Damaged network configuration files in NVRAM.
  • 4NIC Board Fault: Physical damage to Ethernet port.

Solutions

Diagnóstico rápido

The error is identified by a persistent hang on the display during startup. If unplugging the network cable allows the system to boot, the issue is certainly related to network environment settings.

Solución paso a paso

  1. Disconnect the network cable from the printer port.
  2. Restart the system; if it boots, confirm current network settings.
  3. Access network menus to switch from DHCP to Static IP.
  4. Reconnect the cable and test connectivity status.

Prevención y mantenimiento

Always reserve static IPs for enterprise devices to prevent IP address collisions. Keep firmware updated to ensure modern protocol compatibility.

Cuándo llamar a un técnico

If the error 01 persists even while disconnected from the network, the internal NIC board may be physically faulty.

Ficha técnica del equipo

  • Technology: LED Digital MFP
  • Speed: 60 ppm (A4)
  • Connectivity: Gigabit Ethernet
  • Capacity: Up to 5,300 sheets
  • Compatible Consumables: ES9160 Toner / Drum Series
  • Recommended Use: High-volume enterprise environments
  • Official Drivers / firmware

Steps to follow

  1. 1

    Disconnect network

    Unplug the Ethernet cable to rule out IP conflicts during boot.

  2. 2

    Cold boot

    Turn off, hold the Cancel button, and power on the device.

  3. 3

    Set static IP

    Assign a static IP if the network environment causes DHCP issues.

Frequently asked questions

Error 01 typically relates to a network controller configuration conflict during initialization.

Yes, it prevents any network functionality and print server communication.

It uses the ES9160/9170 series high-capacity toner cartridges.

Use compressed air for ports and ensure vents are free from debris.