err-head-liftPM42 RFID

Honeywell PM42 RFID error err-head-lift: Solution

The Honeywell PM42 RFID error err-head-lift signifies that the printhead assembly is not latched shut. This status code keeps the printer in standby to protect the heating element.

1 views

Common causes

  • 1Unlatched lever
  • 2Adhesive debris
  • 3Sensor failure
  • 4Misaligned head

Solutions

Diagnóstico rápido

Check if the pressure lever is properly locked in the downward position.

Solución paso a paso

  1. Open the printer side cover.
  2. Ensure ribbon/labels are loaded correctly.
  3. Firmly push down the printhead lever until it locks.
  4. Clean the printhead latch sensor if obstructed.

Prevención y mantenimiento

Regularly clean the printhead with alcohol wipes. Ensure proper tensioning of the ribbon.

Cuándo llamar a un técnico

If the lever closes but the error persists, the latch sensor might be faulty.

Ficha técnica del equipo

  • Technology: Industrial Thermal
  • Resolution: 203/300 dpi
  • Connectivity: Serial, USB, LAN
  • Consumable: Industrial Ribbon 1" core
  • Usage: High Volume
  • Official Drivers/Firmware

Frequently asked questions

The printhead latch is open, preventing operation.

No, the firmware disables the print process to avoid hardware damage.

Use wax/resin ribbons for industrial applications.

Keep internal sensors clean and ensure the pressure lever mechanism moves freely.

Honeywell PM42 RFID error err-head-lift: Solution | Vimazdev