err-3007ZC300

Zebra ZC300 error 3007: Troubleshooting and Fix

The Zebra ZC300 error 3007 signals a failure in the card transport mechanism. This error occurs when the internal sensors fail to detect a card at the expected time during the print cycle. If you are asking why does my Zebra ZC300 show error 3007, it is most likely due to low traction caused by dust on the feed rollers or static-clung cards.

1 views

Common causes

  • 1Cards sticking together due to static.
  • 2Accumulated dirt on the rubber feed rollers.
  • 3Debris stuck in the feed path.
  • 4Incorrect thickness setting for the card type.

Solutions

Diagnóstico rápido

This error stops the print sequence immediately, often because the printer mechanism is slipping on the card surface or the card is blocked in the feed path.

Solución paso a paso

  1. Empty the card hopper.
  2. Verify that cards are not static-clung and are of correct thickness.
  3. Run a cleaning card through the printer to remove dust from transport rollers.
  4. Ensure there is no debris left in the card path.

Prevención y mantenimiento

Regularly clean the transport path and keep cards in a clean, low-humidity environment to ensure smooth feeding.

Cuándo llamar a un técnico

If the feed mechanism continues to fail after thorough cleaning and card inspection, internal sensors may need professional repair.

Ficha técnica del equipo

  • Technology: Dye-sublimation
  • Consumibles: Standard PVC cards
  • Drivers / Firmware: https://www.zebra.com/support/zc300

Steps to follow

  1. 1

    Empty feeder

    Remove all cards from the input hopper.

  2. 2

    Clean rollers

    Use a specialized adhesive cleaning card.

  3. 3

    Inspect cards

    Ensure no cards are stuck together due to static.

Frequently asked questions

It usually indicates a card feed or card jam in the transport path.

Yes, often caused by dust buildup on the rollers.

Standard PVC cards compatible with the ZC300 specifications.

Use a cleaning card regularly to maintain roller traction.