err-105px6i-plus-ii

Honeywell PX6i Plus II error 105: Troubleshooting Guide

The Honeywell PX6i Plus II error 105 is a system notification indicating a communication timeout on the configured interface. This error occurs when the printer fails to establish a stable connection with the host, often resulting from latency in busy network environments. Proper diagnostic steps involve verifying cabling and network settings.

1 views

Common causes

  • 1Broken or faulty Ethernet cabling
  • 2IP conflict on the local area network
  • 3Input buffer timeout due to heavy traffic
  • 4Host driver communication mismatch

Solutions

Quick Diagnosis

If your printer suddenly stops printing and displays 'Error 105', the link to the host computer has likely timed out. Inspect the Ethernet cable for loose connectors.

Step-by-step Solution

  1. Inspect the physical Ethernet link integrity.
  2. Confirm the static IP configuration in the printer setup menu.
  3. Verify the printer driver port mapping in the Windows Control Panel.
  4. Restart the print spooler service on the host computer.

Prevention and Maintenance

Regularly clean the thermal printhead using authorized cleaning cards. Keep the printer firmware updated to maintain compatibility with modern network security protocols.

When to call a technician

If you have confirmed that the network settings and cables are functional but the error persists, the onboard network interface board may require professional repair.

Equipment Specs

  • Technology: Thermal Transfer / Direct Thermal
  • Resolution: 203 or 300 dpi
  • Connectivity: Ethernet, Serial, USB
  • Capacity: Large industrial label rolls
  • Compatible Consumables: TTR industrial ribbons
  • Recommended Use: Manufacturing / Distribution
  • Official Drivers / Firmware

Frequently asked questions

Error 105 represents a communication timeout, meaning the printer stopped receiving valid data from the host PC.

Restarting the print spooler service is a recommended first step to clear hung jobs.

It is designed for industrial-grade thermal labels and high-performance ribbons.

Always use high-quality shielded Ethernet cables to reduce packet loss and interference.