err-1006PM4 Series

Honeywell PM4 Series error 1006: Media Diagnosis

The Honeywell PM4 Series error 1006 happens when the media sensor cannot detect the label gap or black mark, preventing the printer from aligning the print correctly.

1 views

Common causes

  • 1Sensor misalignment.
  • 2Adhesive blockage.
  • 3Incompatible media.
  • 4Failed calibration.

Solutions

Quick Diagnosis

If you've recently changed label rolls, the sensor likely needs to be recalibrated for the new media's transparency level.

Step-by-Step Solution

  1. Align: Ensure the sensor is directly under the gap.
  2. Calibrate: Run the 'Media Calibration' wizard.
  3. Clean: Remove any sticky residue on the sensor lens.

Prevention and Maintenance

Always re-calibrate after changing material types.

When to Call a Technician

If calibration fails after multiple attempts, the media sensor may be dead.

Technical Specifications

Frequently asked questions

It cannot detect the gap between individual labels.

No, the on-screen menu guides you through the process.

Standard thermal labels are usually detected perfectly.

Clean sensors regularly and calibrate upon loading new rolls.