Fix Canon SELPHY CP1300 Error 07: Cartridge Issue
The Canon SELPHY CP1300 error 07 is a standard warning indicating a problem with the ink ribbon. If you are asking why does my Canon SELPHY CP1300 show error 07, the answer usually involves the sublimation ribbon losing its tension. Read on to learn how to fix the error 07 effectively.
Common causes
- 1Loose ink ribbon in the cartridge.
- 2Improper seating in the ink compartment.
- 3High temperatures causing ribbon degradation.
- 4Ribbon wrinkling due to mishandling.
Solutions
Quick Diagnosis
If the printer refuses to work upon startup, check if the ribbon within the cartridge unit looks slack or wrinkled.Step-by-Step Fix
- Remove: Open the right panel and take out the cartridge.
- Tensioning: Turn the spool gear carefully to pull the slack out of the ribbon.
- Verification: Confirm the ribbon is flat and smooth.
- Reset: Put it back in and try printing again.
Prevention and Maintenance
Do not touch the film. Store in a cool place, as extreme heat can cause the ribbon adhesive to lose grip.When to Call a Technician
If the cartridge is properly tensioned and still reports error 07, the internal ribbon motor may have failed.Equipment Technical Data
- Technology: Dye-sublimation.
- Performance: ~47 sec per print.
- Connectivity: USB, Wi-Fi, SD Card.
- Capacity: 18 photos per pack.
- Compatible Consumables: KP/KL series ink/paper sets.
- Recommended Use: Home photography.
- Official drivers / support
Steps to follow
- 1
Remove cartridge
Open the right-hand door and carefully remove the ink cartridge.
- 2
Tighten ribbon
If the ribbon is loose, use the sprocket wheel to tighten it carefully.
- 3
Reinstall
Reinsert the cartridge until it clicks securely into place.
Frequently asked questions
Error 07 happens when the printer detects the ink ribbon is loose or improperly installed.
Usually, no. You can manually tighten the ribbon and reinsert it successfully.
KP or KL series paper and ink kits.
Keep cartridges in a cool place and avoid excessive handling before installation.