err-060zc350-card-printer

Zebra ZC350 Card Printer error 060: Technical Fix

The Zebra ZC350 Card Printer error 060 happens when the thermal print head temperature is outside the acceptable range during printing. This error 060 is often an indicator that the thermal sensor detected overheating or poor contact with the ribbon. Quick intervention is essential to save the print head.

1 views

Common causes

1Excessive residue buildup on the print head.
2Poor quality ribbon transferring irregular heat.
3Internal fan airflow obstruction.
4Natural wear of print head thermal elements.

Solutions

Diagnóstico rápido

If you see white lines or color gaps, error 060 is a sign that the head performance is degrading.

Solución paso a paso

Clean head: Use a cleaning pen on the thermal print head.
Check supply: Ensure ribbon is not torn or wrinkled.
Calibrate: Run the calibration wizard via driver settings.
Restart: Power cycle to apply changes.

Prevención y mantenimiento

Cleaning the print head with isopropyl alcohol (cleaning pen) after each ribbon replacement is mandatory to prevent plastic residue buildup.

Cuándo llamar a un técnico

If deep cleaning does not resolve the error 060, the thermal print head may have an internal electrical fault.

Ficha técnica del equipo

Technology: Dye sublimation.
Performance: 225 cards/hr.
Connectivity: USB/Eth.
Compatible consumables: Original ZC Ribbons.
Recommended usage: High production.
Official drivers / firmware

Steps to follow

1
Clean head
Use a cleaning pen on the thermal print head.
2
Check supply
Ensure ribbon is not torn or wrinkled.
3
Calibrate
Run the calibration wizard via driver settings.
4
Restart
Power cycle to apply changes.

Frequently asked questions

This requires a thorough cleaning of the print head and sensor calibration.

Continuing to print may damage the head if left unresolved.

Yes, third-party ribbons often have thickness variances triggering this error.

Clean after every ribbon change to prevent residue accumulation.