err-060pm45-ii

Honeywell PM45 II error ERR-060: Quick Solution

The Honeywell PM45 II error ERR-060 occurs when the printer fails to detect the beginning or end of a label (gap or black mark). This error is common when changing media types or if the sensor is dirty. Resolving the ERR-060 error in the PM45 II involves calibrating the media sensors to ensure perfect alignment during printing.

1 views

Common causes

  • 1Media sensor dirty with paper dust.
  • 2Incorrect calibration after label change.
  • 3Improper media alignment in guides.
  • 4Label material not compatible with the current sensor setting.

Solutions

Quick Diagnosis

Error ERR-060 appears if the printer cannot find the gap between labels. Ensure the sensor is aligned with the center of the label media.

Step-by-Step Solution

  1. Ensure the roll is correctly loaded.
  2. Access the sensor configuration menu and select 'Calibrate'.
  3. Follow the panel instructions until the printer advances the media and detects the gap.
  4. Test the print after completing the process.

Prevention and Maintenance

Clean the label sensors with a soft brush or compressed air weekly to keep them free from paper dust.

When to Call a Technician

If after several calibrations the printer still fails to detect media, the sensor may have an internal hardware failure.

Technical Data