err-05SELPHY CP1300

Canon SELPHY CP1300 error 05: Battery/Power failure

The Canon SELPHY CP1300 error 05 is a power-related warning. It triggers when the optional battery is too low to complete a print or when the AC adapter fails to provide a stable voltage. This ensures the unit doesn't lose power during the thermal printing cycle, which could damage the internals.

0 views

Common causes

  • 1Depleted optional battery pack.
  • 2Non-original AC adapter delivering unstable voltage.
  • 3Loose connection at the wall or printer input.
  • 4Faulty internal power distribution circuit.

Solutions

Diagnóstico rápido

When error 05 appears, the unit lacks the energy required for printing. Users often ask why is my Canon SELPHY CP1300 showing error 05, and testing the power source is the immediate diagnostic action.

Solución paso a paso

  1. Check the power source (Battery vs. AC).
  2. Plug into a wall outlet to eliminate the battery as the cause.
  3. Inspect the power cable for visible damage or kinks.
  4. Restart the unit after ensuring a stable power connection.

Prevención y mantenimiento

Always maintain the optional battery pack charged, and keep the charging terminal clean. Always use the original Canon AC adapter.

Cuándo llamar a un técnico

If the error continues even with the verified original AC adapter, the internal power management board may have failed.

Ficha técnica del equipo

  • Technology: Dye-sublimation
  • Print speed: 47 seconds per print
  • Connectivity: Wi-Fi, USB, AirPrint
  • Input capacity: 18 sheets
  • Consumibles: KP-36IP, KP-108IN series
  • Usage: Portable/domestic printing
  • Drivers / firmware official

Steps to follow

  1. 1

    Check power

    Verify if the AC adapter is securely connected or if the battery pack is depleted.

  2. 2

    Test connection

    Disconnect and reconnect the power source to clear any loose connections.

  3. 3

    Charge battery

    If using the optional battery pack, charge it externally for at least 2 hours.

  4. 4

    Restart unit

    Try powering up using only the AC adapter to bypass the battery.

Frequently asked questions

Error 05 indicates a power supply issue, often linked to insufficient battery charge or an unstable connection to the wall adapter.

If it occurs while connected to AC, the adapter might be providing insufficient voltage or the cord may have internal damage.

Yes, the unit works perfectly on AC power. The battery pack is an optional accessory for portable use.

Original KP kits are recommended. Generic supplies may cause detection errors that put unnecessary strain on the power system.