err-03PT-E310BT

Brother PT-E310BT error err-03: Battery Problems

The Brother PT-E310BT error err-03 is a power management alert signalizing that the installed batteries are unable to provide the required voltage. This often occurs during tape cutting or printing high-density labels. Follow this guide to resolve the Brother PT-E310BT error err-03 by checking your power source.

1 views

Common causes

  • 1Insufficient battery voltage.
  • 2Mixing old and new battery cells.
  • 3Oxidized battery compartment springs.
  • 4Faulty internal voltage regulation circuit.

Solutions

Diagnóstico rápido

This code indicates insufficient power. If you are mixing old and new batteries, the internal resistance causes the voltage to drop, triggering the error.

Solución paso a paso

  1. Full Replacement: Replace all batteries with a brand-new set to ensure balanced voltage.
  2. Contact Inspection: Check for any oxidation or corrosion on the battery compartment springs.
  3. Charge Check: If using a rechargeable battery pack, ensure it is fully charged before usage.

Prevención y mantenimiento

Never mix different battery brands or ages. Remove batteries if storing the device for a long period to prevent leakage.

Cuándo llamar a un técnico

If the error persists with fresh batteries, the power regulation circuit might be faulty.

Ficha técnica del equipo

  • Technology: Thermal Transfer
  • Power: Alkaline batteries / Li-ion pack
  • Consumibles: TZE tapes
  • Maintenance: Battery contact cleaning
  • Official Drivers / firmware