err-02p2606w
Pantum P2606W error err-02: Fix Paper Jams
The Pantum P2606W error err-02 signifies a paper feed error or internal jam preventing the rollers from advancing the page. This typically occurs when paper is damp, misaligned, or when small torn fragments get stuck in the feed path. The resolution requires a thorough visual inspection of the input tray and the toner area.
1 views
Common causes
- 1Paper improperly aligned in the tray guides.
- 2Dust buildup on the feed rollers.
- 3Use of unsupported paper weight.
Solutions
Quick Diagnosis
The 'err-02' indicator blinks to notify you that the paper sensor does not detect page progress. If you see crumpled paper after opening the front door, the diagnosis is confirmed.Step-by-step Solution
- Power off the printer and wait 10 seconds.
- Open the front door and carefully remove the toner cartridge.
- Locate any jammed paper and remove it gently along the exit path.
- Check the input tray to ensure paper is not damp or stuck together.
- Reinsert the toner and power the device back on.
Prevention and Maintenance
Do not load more than 150 sheets at once. Fan the paper before loading to separate sheets stuck by static.When to Call a Technician
If the error persists after removing all paper, the paper presence sensor may be damaged or obstructed by debris.Technical Specifications
- Technology: Monochrome Laser
- Speed: 22 ppm
- Connectivity: USB 2.0, Wi-Fi
- Compatible Consumables: PC-211EV cartridge
- Recommended Use: Home/SOHO
- Official Drivers/Firmware
Steps to follow
- 1
Access internal
Open front cover and pull out the toner.
- 2
Clear jam
Remove jammed paper slowly to avoid breaking pieces.
- 3
Restart
Close the door and turn the printer on.
Frequently asked questions
The err-02 code points to a paper jam within the internal feed mechanism.
It is a minor issue requiring user intervention to clear the paper path.
It utilizes genuine Pantum PC-211EV cartridges to maintain drum integrity.
Always use standard 80g/m2 paper and do not exceed the tray capacity.