err-01LW-600P

Epson LabelWorks LW-600P error 01: Fix guide

The Epson LW-600P error 01 is a common mechanical error indicating that the tape cassette is not detected or is feeding incorrectly. This usually happens when the tape is loose inside the cartridge or the cassette is not fully seated.

1 views

Common causes

  • 1Loose tape ribbon.
  • 2Poor cassette installation.
  • 3Adhesive residue build-up.
  • 4Sensor misalignment.

Solutions

Quick Diagnosis

Remove the tape cassette. If the ribbon looks loose or wrinkled, that is the cause of the error.

Step-by-Step Solution

  1. Remove Cartridge: Open the cover and eject.
  2. Clean Rollers: Use a clean dry cloth.
  3. Reseat: Insert firmly until it clicks.
  4. Test: Reconnect via the mobile app.

Maintenance and Prevention

Store tape cassettes in a cool, dry place. Replace if the tape appears damaged.

When to Call a Technician

If multiple cassettes show the same error, the internal feeding mechanism may require service.

Device Technical Specifications

  • Technology: Thermal.
  • Connectivity: Bluetooth.
  • Speed: 15mm/s.
  • Cutter: Auto.
  • Media: LK-series.
  • Use: Personal/Office.
  • Drivers/Firmware

Steps to follow

  1. 1

    Remove Cartridge

    Open the cover and eject.

  2. 2

    Clean Rollers

    Use a clean dry cloth.

  3. 3

    Reseat

    Insert firmly until it clicks.

Frequently asked questions

Tape detection failure.

No, easily fixable by reseating the tape.

Epson LK-series tapes only.

Clean thermal printhead regularly.