E820imageCLASS MF3010

Fix Canon MF3010 Error E820: Fan Failure Guide

Error E820 on the Canon imageCLASS MF3010 is a critical warning concerning the cooling system. This code triggers when the fan fails to reach the required RPM or is physically seized, which is essential to prevent heat damage. Ignoring this could lead to the processor shutting down to protect itself.

1 views

Common causes

  • 1Physical blockage of the fan blades due to dust accumulation.
  • 2Mechanical wear-and-tear of the fan bearings.
  • 3Loose internal connection to the main DC controller board.

Solutions

External Ventilation Check

  1. Ensure the printer air vents are free of obstructions.
  2. Keep at least 10 cm of space around the printer for proper airflow.

Internal Cleaning

  1. Use compressed air (carefully) to clean dust from the fan area via the vents.
  2. Remove debris that might obstruct the fan blades.

Steps to follow

  1. 1

    Clear Air Vents

    Remove any external items preventing cool air from circulating.

  2. 2

    Test Airflow

    Check for airflow coming out of the printer exhaust upon power-up.

  3. 3

    Power Cycle

    Perform a reboot to clear the error state and re-check fan sensors.

Frequently asked questions

No. Proper cooling is vital for printer component longevity, especially during large print jobs.

Compressed air is the best method to remove dust without opening the printer chassis.

Replacing the fan requires partial disassembly of the unit; if you are uncomfortable with this, consult a professional.

Fix Canon MF3010 Error E820: Fan Failure Guide | Vimazdev