e8Smart Tank Plus 651

HP Smart Tank Plus 651 error E8: Ink system failure

The HP Smart Tank Plus 651 error E8 indicates that the continuous ink supply system has detected an anomaly. This may be due to air bubbles in the lines or inadequate pressure in the tanks. Resolving this quickly is essential to prevent printhead damage.

1 views

Common causes

  • 1Air bubbles in ink tubes.
  • 2Critically low ink levels.
  • 3Tank filter obstruction.
  • 4Ink pressure sensor failure.

Solutions

Quick Diagnostics

Error E8 usually appears if the ink level is very low or if air is trapped in the internal lines. Visually inspect if the lines have consistent ink.

Step-by-Step Solution

  1. Check that ink levels are above the minimum line.
  2. Run the printhead cleaning tool from HP software.
  3. Ensure the tank air plug is in the correct position.
  4. Restart the printer to force ink priming.

Prevention and Maintenance

Never let ink levels fall below the minimum mark. Use the printer regularly to maintain constant flow.

When to Call a Technician

If the tubes are completely empty or contain air after multiple cleanings, the pump system may be failing.

Equipment Technical Data

  • Technology: Continuous Ink
  • Speed: Up to 11 ppm
  • Connectivity: Wi-Fi
  • Compatible Consumable: GT51/GT52
  • Recommended Use: Home/Office
  • Official drivers / firmware

Frequently asked questions

It is due to pressure anomalies or air in the ink tubes.

Yes, if the printer is left unused for long periods.

Use original GT51/GT52 ink series.

Print a test page weekly to keep ink flowing.