e6001zc350t

Zebra ZC350t Error E6001: Cleaning Guide

The Zebra ZC350t error E6001 notifies you that the printer rollers failed to intake a card correctly. Dirt and card dust are the most common culprits for this feeding fault. Proper cleaning of the internal mechanism will quickly clear the error and restore your ID printing capabilities.

0 views

Common causes

  • 1Dirty cleaning rollers.
  • 2Static-prone PVC cards.
  • 3Main feed roller wear.
  • 4Foreign debris in the card path.

Solutions

Quick Diagnosis

Error E6001 confirms the printer could not successfully feed a card.

Step-by-Step Solution

  1. Remove all cards from the input slot.
  2. Insert a Zebra alcohol-based cleaning card.
  3. Use the driver tools to trigger the cleaning sequence.
  4. Reload fresh cards once complete.

Prevention and Maintenance

Use a cleaning kit every 500 cards to prevent dust buildup on rollers.

When to Call a Professional

Call support if the feed rollers look worn or if errors continue after cleaning.

Device Technical Specs

Technology: Dye-sublimation, Speed: 225 cards/hr, Connectivity: USB/Ethernet, Capacity: 100 cards, Supplies: Zebra ZC Ribbon, Use: Identification, Drivers: Download Link.

Steps to follow

  1. 1

    Empty

    Remove the card batch.

  2. 2

    Clean

    Use a specialized cleaning card.

  3. 3

    Trigger

    Run the cleaning routine in software.

  4. 4

    Retry

    Attempt to print again.

Frequently asked questions

This error means the roller cannot grab the card, usually due to dust.

Perform monthly roller cleaning using official Zebra kits.

It uses Zebra ZC ribbons and standard PVC cards.

It is a standard maintenance alert to ensure printing quality.