E60Fujitsu PrintPartner V40Has video

Fujitsu PrintPartner V40 Error E60 LED Head Fix

Error E60 points to a failure or synchronization lapse with the print write system (LED Print Head / LPH). The logic controller has lost communication with the optoelectronic array.

1 views

Common causes

  • 1Toner dust blockage on the LED writing glass panel.
  • 2Loose or misaligned Flat Flexible Cable (FFC) connectors.
  • 3Defective LED Print Head array.

Solutions

Optical System Troubleshooting steps

  1. Locate and Clean the LED Glass: Pull out the process cartridge. Locate the long glass window strip of the LED printhead on the upper interior and wipe it gently with a dry, clean lint-free cloth.
  2. Inspect the Flat Flexible Cable (FFC): Trace the flat ribbon cable from the LED head to the system control board. Disconnect and reseat it securely to ensure no loose contacts.
  3. Power Reset: Close the covers, re-install the cartridges, and reboot the system to see if the main CPU can re-establish communication with the LED unit.

Steps to follow

  1. 1

    Expose the LED Unit

    Open the printer's top service door and take out the imaging cartridge safely.

  2. 2

    Perform Dry Cleaning

    Gently clean the optical glass barrier using a specialized cleaning wand or dry microfiber cloth.

  3. 3

    Reseat Ribbon Cable

    Verify that the FFC connector is squarely seated inside its retaining slot on the board.

Videos

Frequently asked questions

Yes, highly microscopic toner particles can scatter over the LED print head glass, interrupting the writing beam path and triggering error codes.