e55HL-B2080DW

Brother HL-B2080DW Error E55 Fix

The Brother HL-B2080DW error e55 usually points to a drum unit cleaning requirement or a failed sensor check. Maintaining the drum is vital for print quality and device longevity. Addressing why my Brother HL-B2080DW showing error e55 occurs will save you time and prevent unnecessary component replacement.

1 views

Common causes

  • 1Toner residue on the drum surface
  • 2Drum unit lifecycle limit reached
  • 3Corona wire blockage
  • 4Improper drum installation

Solutions

Quick Diagnosis

If your prints show vertical stripes or smudges accompanied by an E55 message, the drum unit is physically dirty.

Step-by-step Solution

  1. Open the printer front access door.
  2. Pull out the drum/toner unit.
  3. Use the green tab to clean the primary corona wire inside the drum.
  4. Reinsert the unit.

Prevention and Maintenance

Always keep the interior area free of paper dust. Do not touch the drum surface with your skin.

When to call a technician

If the printer displays E55 after a thorough drum cleaning and reset, the entire drum assembly likely needs a replacement.

Technical Data

  • Technology: Laser Printer
  • Speed: 34 ppm
  • Connectivity: Wi-Fi, USB
  • Capacity: 250 sheets
  • Consumables: TN-B023 Toner / DR-B023 Drum
  • Recommended Use: Home/Office
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Open cover

    Open the front cover access door.

  2. 2

    Remove drum

    Take out the drum unit and toner cartridge.

  3. 3

    Clean

    Slide the green tab across the drum top.

Frequently asked questions

The error E55 indicates the drum unit is dirty or has reached its capacity limit.

Only if cleaning fails to resolve the error or improve print quality.

Use original Brother TN-B023 toner series for the best output.

Use the green tab every time you replace the toner cartridge.

Brother HL-B2080DW Error E55 Fix | Vimazdev