e515QLn220 Plus

Zebra QLn220 Plus Error E515: Battery Issues

The Zebra QLn220 Plus error E515 indicates a power management issue, commonly linked to the battery not holding a charge or failing to report its status correctly to the mobile printer.

1 views

Common causes

  • 1Degraded battery chemical integrity.
  • 2Dirty battery terminal connectors.
  • 3Faulty wall charger adapter.
  • 4Voltage fluctuations during charging.

Solutions

Diagnóstico rápido

Check if the error happens without the external power adapter. If the printer works while plugged in, the battery is the likely culprit.

Solución paso a paso

  1. Remove the battery and wipe contacts.
  2. Charge the device using the original wall adapter.
  3. Perform a factory reset if the error persists.

Prevención y mantenimiento

Store batteries in cool places and clean terminal pins monthly.

Cuándo llamar a un técnico

If the error returns with a brand new battery, the internal power circuit board may require replacement.

Ficha técnica del equipo

  • Technology: Thermal Mobile Printing
  • Connectivity: Bluetooth / Wi-Fi
  • Consumibles: Original Zebra Li-Ion batteries
  • Official Drivers / Firmware

Steps to follow

  1. 1

    Check Contacts

    Inspect battery pins.

  2. 2

    Charging

    Use official charger only.

  3. 3

    Reboot

    Power cycle the device.

Frequently asked questions

It is a power supply fault related to the battery.

No, it prevents the printer from booting correctly in portable mode.

Always use original Zebra-branded Li-Ion cells.

Keep terminals clean and avoid deep discharge.

Zebra QLn220 Plus Error E515: Battery Issues | Vimazdev