E51Fujitsu PrintPartner V40Has video

Fixing Fuser Error E51 on Fujitsu PrintPartner V40

Error code E51 on the Fujitsu PrintPartner V40 flags a fuser heating failure. The fuser unit is unable to reach stable operating temperature during system initialization.

1 views

Common causes

  • 1Blown fuser thermal fuse or open halogen lamp circuit.
  • 2Defective thermistor that incorrectly reads the roller temperature.
  • 3Faulty high-voltage power supply board.

Solutions

Fuser Component Diagnostics

  1. Ensure Adequate Cooling: Power off and unplug the printer. Let the machine cool down for 20-30 minutes before working on the internal parts.
  2. Check Electrical Terminals: Remove the fuser assembly and visually inspect its interface connectors. Clean any accumulated toner or dust build-up.
  3. Test the Thermistor & Lamp: Using a digital multimeter, check the heating lamp filament for continuity and test the thermistor’s resistance value.
  4. Power Source Check: Always connect the printer directly to a wall outlet rather than power strips, as voltage drops can prevent the fuser from heating adequately.

Steps to follow

  1. 1

    Power Off & Wait

    Unplug the power cord and wait for the fuser unit to cool down completely.

  2. 2

    Clean Contacts

    Inspect and clean the gold-plated electrical contacts on the fuser and inside the printer frame.

  3. 3

    Re-install and Test

    Firmly lock the fuser back into place, secure any locking levers, and plug the printer directly into the wall.

Videos

Frequently asked questions

Yes, sharing a power strip with heavy appliances can drop the input voltage, causing the heater to warm up too slowly and trigger E51.

Fixing Fuser Error E51 on Fujitsu PrintPartner V40 | Vimazdev