E4001ScanSnap S1300i

Fujitsu ScanSnap S1300i Error E4001 Fix

Fujitsu ScanSnap S1300i error E4001 indicates a document feed issue. Learning how to fix Fujitsu ScanSnap error E4001 involves ensuring the rubber rollers are clean and not slipping on your paper.

1 views

Common causes

  • 1Dusty, slippery rubber rollers.
  • 2Worn roller surface.
  • 3Paper debris trapped in ADF.
  • 4Misaligned document guide.

Solutions

Diagnóstico rápido

The scanner makes a clicking or straining noise, followed by an error LED.

Solución paso a paso

  1. Open the scanner cover.
  2. Wipe rollers with isopropyl alcohol.
  3. Remove any paper debris.
  4. Close cover and restart scan.

Prevención y mantenimiento

Regular cleaning prevents paper slips. Replace roller kit annually for heavy users.

Cuándo llamar a un técnico

If cleaning fails, the internal gear assembly may be damaged.

Ficha técnica del equipo

  • Technology: Duplex scanner
  • Speed: 12 ppm
  • Connectivity: USB
  • Capacity: 10 sheets ADF
  • Compatible consumables: Roller Kit S1300i
  • Recommended use: Desktop scanning
  • Drivers / official firmware

Steps to follow

  1. 1

    Clean rollers

    Use a lint-free cloth with cleaner.

  2. 2

    Check path

    Clear debris.

  3. 3

    Reset

    Reconnect device.

Frequently asked questions

Clean the pickup rollers to restore grip.

Mostly caused by worn rollers rather than internal failure.

Replacement roller kits are recommended yearly.

Regular maintenance and avoiding dusty documents.