e4LaserJet Pro M15w Plus

HP LaserJet Pro M15w Plus E4 Error: Connectivity Fix

The HP LaserJet Pro M15w Plus error E4 signifies a breakdown in wireless communication or an invalid Wi-Fi configuration. This issue blocks mobile devices and PCs from sending data to the printer. Why is my HP LaserJet Pro M15w Plus showing error E4? Usually, it is caused by changed router settings or an unstable wireless signal.

0 views

Common causes

  • 1Signal interference or out-of-range Wi-Fi.
  • 2Change in network credentials or router settings.
  • 3IP address conflict on the local network.
  • 4Router blocking new device connections.

Solutions

Diagnóstico rápido

If the E4 light is active, check the Wi-Fi indicator on the printer. A blinking light confirms the printer is searching for a network but cannot establish a link.

Solución paso a paso

  1. Reboot the router and wait for full initialization.
  2. Restart the printer to allow a fresh connection handshake.
  3. Use the HP Smart app on your mobile device to re-enter Wi-Fi credentials.
  4. Reset network settings by pressing the Wi-Fi and Cancel buttons simultaneously if needed.

Prevención y mantenimiento

Ensure the printer stays in range of the router and clear of metallic obstructions. Updating the printer firmware regularly via USB can resolve background connectivity bugs.

Cuándo llamar a un técnico

If the error persists after resetting network settings and performing a fresh setup, the internal wireless hardware module might be faulty and requires professional servicing.

Ficha técnica del equipo

  • Technology: Laser printer
  • Connectivity: Wi-Fi 802.11b/g/n, USB 2.0
  • Speed: 19 ppm
  • Consumable: HP 44A (CF244A)
  • Maintenance: Bi-annual firmware updates
  • Official Drivers/Firmware

Steps to follow

  1. 1

    Check network status

    Verify your Wi-Fi router is broadcasting correctly.

  2. 2

    Power cycle printer

    Turn off the printer to force a new IP renewal.

  3. 3

    Reconfigure Wi-Fi

    Use the HP Smart app to restore network credentials.

Frequently asked questions

The E4 error denotes a wireless connection failure, often due to weak signal or a router handshake issue.

Yes, if you rely on wireless printing; however, physical USB printing remains fully functional.

Assigning a static IP address for your printer via your router settings will significantly increase connection stability.

Using the original HP 44A toner ensures the printer's internal firmware stays updated and manages network resources efficiently.