e4LaserJet Pro M12w

HP LaserJet Pro M12w E4 Error: Wi-Fi Issues

The HP LaserJet Pro M12w error E4 indicates a loss of Wi-Fi communication between your device and the router. This common connection error occurs frequently after router reboots or network setting updates, leaving the printer unable to receive print jobs. Follow our troubleshooting steps to resolve the E4 error and re-establish your wireless printing capabilities. Ensuring a stable connection is vital for utilizing this laser printer in an office or home environment.

1 views

Common causes

  • 1Router password or security encryption change.
  • 2Signal interference from household electronics.
  • 3Network IP address conflict.
  • 4Outdated firmware failing to handshake with new routers.

Solutions

Diagnóstico rápido

If the Wi-Fi LED is blinking red, the E4 error is present. Confirm this by attempting a wireless test print from your mobile device.

Solución paso a paso

  1. Restart router: Power cycle your router to refresh the wireless signal.
  2. Reset network: Hold the Wi-Fi button on the printer for 5 seconds.
  3. Reconfigure: Use the HP Smart app to reconnect the printer.
  4. Check proximity: Ensure the printer is within range of the signal.

Prevención y mantenimiento

Avoid placing the printer behind obstacles that block Wi-Fi signals. Regular firmware updates through the official HP portal help maintain network stability.

Cuándo llamar a un técnico

If the wireless card fails to initialize even after a hard reset, the internal Wi-Fi module might be defective.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Monthly duty cycle: Up to 5,000 pages
  • Connectivity: USB, Wi-Fi 802.11 b/g/n
  • Consumables: 79A (CF279A) toner
  • Usage: Small office / Home
  • Official drivers

Steps to follow

  1. 1

    Restart router

    Power cycle your router to refresh the wireless signal.

  2. 2

    Reset network

    Hold the Wi-Fi button on the printer for 5 seconds.

  3. 3

    Reconfigure

    Use the HP Smart app to reconnect the printer.

  4. 4

    Check proximity

    Ensure the printer is within range of the signal.

Frequently asked questions

The E4 error code suggests the printer cannot establish a connection to your wireless network.

No, it is usually a network settings conflict that is easily fixed with a reset.

No, they are separate subsystems; always stick to the 79A toner series.

Updating firmware is recommended to prevent common network-related errors.