e4LaserJet P1102w

HP LaserJet P1102w Error E4: Memory/Config Issue

The HP LaserJet P1102w error E4 is a system fault notifying the user about a memory addressing or configuration issue. This often happens when the printer is overwhelmed by a print job or the communication settings are mismatched between the PC and the machine. A cold reset usually clears the internal state and restores normal operation.

1 views

Common causes

  • 1Overloaded print queue.
  • 2Outdated system firmware.
  • 3Network configuration conflicts.
  • 4Hardware memory limitation.

Solutions

Quick Diagnosis

If your printer stops midway through a large document and the attention light flashes, the E4 error is likely due to memory overflow.

Step-by-Step Solution

  1. Clear cache: Cancel all pending jobs on the computer.
  2. Reboot: Turn the printer off, then back on.
  3. Reset: Hold the cancel button during startup if the error persists.

Prevention and Maintenance

Limit the complexity of print jobs. Keep the latest drivers installed to avoid memory management issues.

When to Call a Technician

If the reset does not fix E4, the internal board may require a repair service.

Technical Specs

  • Technology: Laser
  • Speed: 19 ppm
  • Connectivity: USB/Wi-Fi
  • Consumable: HP 85A Toner
  • Official support

Steps to follow

  1. 1

    Power off

    Turn off the printer and disconnect the network/USB cable.

  2. 2

    Hard reset

    Press and hold the cancel button for 10 seconds during power-up.

Frequently asked questions

It signifies that the printer cannot process incoming data due to a memory or configuration mismatch.

Send smaller print jobs and ensure your driver is up to date with the printer firmware.

Use the HP 85A (CE285A) toner cartridge for optimal reliability.

Keeping the machine clean and in a stable environment prevents various system-related errors.