e4fi-7260

Fujitsu fi-7260 error E4: Troubleshooting Guide

The fujitsu fi-7260 error e4 is a common alert indicating a document sensor reading failure. This code typically occurs when there is a physical obstruction or dust accumulation preventing proper scanning. The solution requires clearing the document path and ensuring the sensors are clean to restore functionality.

1 views

Common causes

  • 1Dust buildup on the paper detection sensor.
  • 2Foreign objects or paper debris in the tray.
  • 3Worn-out separation rollers.
  • 4Internal controller board failure.

Solutions

Diagnóstico rápido

Error E4 appears when the scanner cannot confirm the paper path status. If the scanner stops immediately and the display blinks, check for internal dust.

Solución paso a paso

  1. Power cycle: Disconnect the power for 30 seconds to reset logic.
  2. Visual inspection: Open the scanner cover and remove any paper remnants.
  3. Clean sensors: Wipe the optical glass with a lint-free cloth.
  4. Reset test: Run a sample scan.

Prevención y mantenimiento

Perform cleanings every 5,000 scans using authorized cleaning materials. Ensure that the rollers are not worn out.

Cuándo llamar a un técnico

If the error persists after cleaning, the sensor hardware might be faulty.

Ficha técnica del equipo

Steps to follow

  1. 1

    Power cycle

    Disconnect the power cable for 30 seconds.

  2. 2

    Visual inspection

    Open the top cover and check for obstructions.

  3. 3

    Clean sensors

    Use a dry cloth to clean the optical sensor glass.

Frequently asked questions

The error E4 usually points to a sensor reading failure due to dust or foreign objects.

It is not permanent, but it stops scanning operations until the sensor is clear.

This model requires the FI-7260RKA roller kit for optimal paper feeding.

Regular maintenance and cleaning every 5,000 scans will prevent dust accumulation.