e3DeskJet 1510

HP DeskJet 1510 error E3: Carriage jam

The HP DeskJet 1510 error E3 points to a print carriage movement blockage, meaning the device cannot slide freely along the guide rail. This is typically due to foreign objects, paper remnants, or accumulated residue blocking the path.

1 views

Common causes

  • 1Foreign objects (clips/paper).
  • 2Dust buildup.
  • 3Encoder strip damage.
  • 4Motor/gear wear.

Solutions

Diagnóstico rápido

If you encounter error E3, the printer has detected resistance. Listen for repetitive knocking sounds that suggest the carriage is stuck.

Solución paso a paso

  1. Unplug: Remove power while the unit is active to unlock the carriage.
  2. Free it up: Slide the carriage to the center.
  3. Clear path: Check the guide rail and floor of the printer for debris.
  4. Smooth movement: Slide the carriage back and forth to ensure no friction exists.

Prevención y mantenimiento

Clean the metal rod occasionally to prevent ink/dust buildup. Never place objects inside the printer opening.

Cuándo llamar a un técnico

If the carriage is clear and the rail is clean but the error persists, the carriage motor or encoder strip may be damaged.

Ficha técnica del equipo

  • Technology: Inkjet.
  • Component: Cartridge carriage.
  • Connectivity: USB 2.0.
  • Consumibles: HP 301 cartridges.
  • Mechanism: Sliding rail.
  • Official drivers / firmware

Steps to follow

  1. 1

    Unplug

    Unplug the printer while it's on to release the carriage motor.

  2. 2

    Inspect

    Open the lid and remove any visible obstructions or paper.

  3. 3

    Manual movement

    Manually slide the carriage side to side to check for smoothness.

Frequently asked questions

It indicates a physical blockage in the print carriage movement mechanism.

Yes, but always do it with the power unplugged.

HP 301.

Keep the carriage slide bar clean.