HP Smart Tank 7305 Error E2: Paper Length Solution
The hp smart tank 7305 error e2 is a warning that there is a discrepancy between the loaded paper and the print job's specified format. The printer detects that the sheet length exceeds the expected size or that the auto-detection failed. This is typically a configuration issue easily managed in the print settings menu on your computer.
Common causes
- 1Setting mismatch: print settings larger than paper size.
- 2Sensor fault: length detection sensor inaccuracy.
- 3Obstruction: sheet not advancing correctly.
- 4Paper not supported: dimensions outside printer specs.
Solutions
Quick Diagnosis
E2 alerts occur when the sensor sees a longer paper path than your current settings allow. Ensure your paper guides are snug against the paper stack.Step-by-Step Solution
- Cancel the current print job using the Cancel button.
- Open print settings on your PC.
- Confirm that the paper size matches the physical sheet (e.g., A4, Legal).
- Adjust the guide slides to fit the paper snugly.
- Retry the print task.
Prevention and Maintenance
Make sure to set the correct paper size every time you change paper types to avoid sensor-related E2 warnings.When to Call a Technician
If you consistently get E2 errors with standard paper and correct settings, the document size sensor may be faulty.Equipment Technical Data
- Technology: Continuous Inkjet
- Speed: 15 ppm (Black)
- Connectivity: Wi-Fi, Ethernet, USB
- Capacity: 250 sheets
- Consumables: HP GT53 Bottles
- Usage: Small Office
- Official Drivers / Firmware
Steps to follow
- 1
Cancel print
Press the Cancel button on the printer.
- 2
Adjust paper
Verify the paper size matches your print configuration.
- 3
Retry
Start your print job again from the software.
Frequently asked questions
E2 indicates that the paper size loaded does not match the configured print job size.
Yes, clearing the queue is recommended to prevent the same error from popping up again.
Uses HP GT53 original ink bottles.
Yes, define the specific dimensions in the HP Smart software before you print.