e2LaserJet P1102w

HP LaserJet P1102w E2 Error: Paper Jam Solution

The HP LaserJet P1102w error E2 is the standard notification for a paper jam occurring within the printer chassis. This issue arises when paper fails to feed correctly into the fuser, causing internal sensors to pause the motor for safety. It is a common fault that can be resolved quickly by following the correct extraction steps. This monochrome laser printer is highly valued for its durability and compact design in home office environments.

1 views

Common causes

  • 1Excessive paper weight blocking the fuser path.
  • 2Accumulation of paper residue on feed rollers.
  • 3Use of damp or incorrectly stored paper.
  • 4Physical damage to the paper input guide.

Solutions

Diagnóstico rápido

The error shows through flashing status lights. If you notice the printer attempting to grab a sheet but stopping with a sharp sound, it is a confirmed jam.

Solución paso a paso

  1. Turn off printer: Unplug the power cable for safety while removing the paper.
  2. Open cover: Open the toner access door and gently remove the toner cartridge.
  3. Remove paper: Pull the jammed paper with both hands to prevent it from tearing.
  4. Reinstall toner: Reinsert the toner and close the door to reset the sensor.

Prevención y mantenimiento

Keep the feed rollers clean using a dry cloth. Avoid using thick or damp paper. Using original HP 85A toner ensures smooth operation and longer fuser life.

Cuándo llamar a un técnico

If the error continues after cleaning the path, the fuser might be damaged or paper sensors misaligned, requiring professional service.

Ficha técnica del equipo

  • Tecnología: Monochrome Laser
  • Velocidad/rendimiento aproximado: 19 ppm
  • Conectividad: USB 2.0 / Wi-Fi
  • Capacidad de alimentación: 150 sheets
  • Consumible compatible: HP 85A (CE285A)
  • Uso recomendado: Small office / home
  • Official drivers / firmware

Steps to follow

  1. 1

    Turn off printer

    Unplug the power cable for safety while removing the paper.

  2. 2

    Open cover

    Open the toner access door and gently remove the toner cartridge.

  3. 3

    Remove paper

    Pull the jammed paper with both hands to prevent it from tearing.

  4. 4

    Reinstall toner

    Reinsert the toner and close the door to reset the sensor.

Frequently asked questions

The E2 error appears when the printer sensor detects an obstruction in the paper path.

Yes, you should remove the jammed paper promptly to prevent heat damage from the fuser.

It uses the HP 85A (CE285A) toner cartridge.

Use high-quality paper, align it in the tray, and don't overload the input slot.