E2fi-7460

Fujitsu fi-7460 Scanner Error E2: ADF Troubleshooting

The E2 error code on the Fujitsu fi-7460 relates directly to the Automatic Document Feeder (ADF) mechanism. It typically triggers when the feeder fails to pull documents through the path successfully, resulting in a system halt. This is often caused by document loading issues or physical obstructions within the feed assembly.

1 views

Common causes

  • 1Overloading the input tray past the 100-sheet capacity limit.
  • 2Foreign objects or debris obstructing the roller pathway.
  • 3Side guides set too tight causing paper friction during transit.

Solutions

Tray Adjustment

  1. Remove all documents currently loaded in the ADF tray.
  2. Ensure all paper edges are perfectly aligned.
  3. Adjust the side guides so they are snug but not pinching the paper stack.

Document Inspection

  1. Check for forgotten staples, paperclips, or Post-it notes.
  2. Ensure the paper thickness is within the scanner's official specifications.

Steps to follow

  1. 1

    Clear Path

    Remove the paper stack to release tension from the feeder.

  2. 2

    Check Mechanism

    Inspect the feed path for any torn paper scraps.

  3. 3

    Reload

    Reload a smaller stack of documents to test the feeder's performance.

Frequently asked questions

The ADF is designed for up to 100 sheets of standard paper. Overfilling is a common trigger for the E2 error.

Side guides might be adjusted too tightly, preventing the sheets from entering the rollers smoothly.

If you experience frequent E2 errors, the friction pads may have worn down and might require replacement.