E2-001PA03670

Fujitsu PA03670 Error E2-001 Troubleshooting Guide

Error code E2-001 on the Fujitsu PA03670 indicates a document feed failure. This issue prevents the scanner from correctly moving documents through the path. Proper maintenance is key to ensuring consistent performance and avoiding data capture interruptions.

2 views

Common causes

  • 1Dust and toner accumulation on the pickup rollers.
  • 2Blocked paper presence sensor.
  • 3Worn rollers reaching the end of their service life.

Solutions

Roller Maintenance

  1. Power off the device and unplug it.
  2. Open the top cover assembly.
  3. Clean rollers using F1 cleaning fluid and a lint-free cloth.
  4. Rotate rollers to ensure complete surface coverage.

Sensor Calibration

  1. Inspect the entry sensor for debris.
  2. Gently remove any dust or small paper bits that may obstruct the beam.

Steps to follow

  1. 1

    Safety first

    Always disconnect the power supply before performing internal maintenance.

  2. 2

    Visual inspection

    Open the scanner unit to look for any hidden paper fragments.

  3. 3

    Cleaning process

    Use official Fujitsu cleaning supplies to maintain rubber grip.

Frequently asked questions

Cleaning every 5,000 scans is recommended to maintain optimal document grip.

Usually, it is a routine maintenance error rather than a permanent hardware failure.

No, please only use manufacturer-approved cleaning fluids to prevent material damage.