e196-0000imageCLASS MF264dw

Canon imageCLASS MF264dw error E196: Network Fix

The Canon imageCLASS MF264dw error E196 occurs during network configuration or communication failures. This code alerts you that the printer is failing to maintain a stable link with your local network. It is typically resolved by resetting the network stack or addressing IP conflicts within your home or office router.

1 views

Common causes

  • 1IP Conflict: Multiple devices competing for the same internal address.
  • 2Router issues: DHCP server failing to assign fresh IPs.
  • 3Corruption: Network configuration file is damaged.
  • 4Weak Signal: Poor Wi-Fi coverage causing frequent disconnection.

Solutions

Diagnóstico rápido

If the printer is unreachable by your computers or the Wi-Fi indicator shows a fault, the network stack likely needs a refresh. E196 indicates an internal error in managing network traffic.

Solución paso a paso

  1. Navigate to 'Network Settings' on the printer display.
  2. Select 'Reset network settings' to clear potential conflicts.
  3. Scan for your wireless network and re-enter credentials.
  4. Check the printer's status report to confirm a new IP address has been assigned.

Prevención y mantenimiento

Assigning a static IP to the printer via the router dashboard is highly recommended to prevent future connection drops. Ensure your router firmware is current.

Cuándo llamar a un técnico

If the printer cannot find any available wireless networks even after a full factory reset, the network card might be faulty.

Ficha técnica del equipo

  • Technology: Monochrome Laser
  • Speed: 30 ppm
  • Connectivity: Wi-Fi, Ethernet and USB
  • Network: Dynamic and Static IP support
  • Consumables: Canon 051 / 051H toner series
  • Usage: Network-connected office environments
  • Official drivers / firmware

Steps to follow

  1. 1

    Restart router

    Power off and on your network router to refresh IP assignments.

  2. 2

    Network reset

    Access the network settings menu and choose 'Reset network settings'.

  3. 3

    Check connection

    Reconnect to your Wi-Fi and verify the IP address via the network status report.

Frequently asked questions

The E196 error happens when the network interface card struggles to maintain synchronization with your router.

It's not critical for manual printing but prevents all network-related features like wireless printing and scanning.

Toner (Canon 051) is not related to networking; focus troubleshooting on the router and IP settings.

Setting a static IP for your printer within the router configuration is the best preventive measure.