e1-01fi-7300NX

Fujitsu fi-7300NX E1-01 Error: Fix Paper Jam Issues

The Fujitsu fi-7300NX error E1-01 is a common indicator that a paper jam has occurred within the automatic document feeder (ADF). When this error triggers, the scanner's internal sensors stop the transport mechanism to prevent damage to the documents or the feed rollers. Most users can resolve this issue by removing the blocked paper and ensuring the feed path is free of debris. This network scanner is highly reliable, provided the maintenance cycles for the internal rollers are kept up to date.

1 views

Common causes

  • 1Document jam due to improperly aligned sheets.
  • 2Worn-out rubber on the Pick Roller reducing traction.
  • 3Dust or toner accumulation blocking the optical sensors.
  • 4Attempting to scan documents with staples or clips attached.

Solutions

Diagnóstico rápido

You can confirm the E1-01 error by checking the scanner's touch panel for the obstruction warning. If you see physical paper remains in the ADF feed tray or the glass area, this is the definitive cause of the code.

Solución paso a paso

  1. Power Off: Safely disconnect the power cable from the scanner.
  2. Open the ADF: Pull the release lever and fully open the top cover.
  3. Extraction: Slowly pull out the jammed paper in the direction of the paper feed.
  4. Surface Cleaning: Use an official cleaning fluid on a cloth to wipe all rollers.
  5. Restart: Close the cover and power on the device to clear the status.

Prevención y mantenimiento

Prevent paper jams by keeping documents flat and removing any staples. A regular cleaning schedule for the rollers is essential. Avoid using generic or poor-quality consumables, as these may not meet the friction requirements of the fi-7300NX mechanism.

Cuándo llamar a un técnico

If the error message persists after clearing the path and cleaning the rollers, the issue likely resides with the internal sensor array. Contact your authorized service partner for a professional diagnostic.

Ficha técnica del equipo

  • Technology: Duplex document scanner with ADF
  • Speed: Up to 60 ppm / 120 ipm
  • Connectivity: Wi-Fi, Ethernet, USB 3.1
  • Capacity: 80-sheet input tray
  • Consumables: Roller Kit PA03670-0002
  • Usage: Corporate document management
  • Official drivers / firmware

Steps to follow

  1. 1

    Open ADF Cover

    Use the release lever to open the ADF unit and expose the feed path.

  2. 2

    Remove Obstructing Paper

    Gently remove the jammed document to ensure no scraps remain.

  3. 3

    Clean Rollers

    Wipe the feed rollers with a lint-free cloth dampened with official cleaner.

  4. 4

    Reset Unit

    Close the cover firmly and retry the scanning task.

Frequently asked questions

The E1-01 error code indicates a paper jam within the ADF path, preventing document feeding during the scan process.

It is a standard mechanical alert. It is not critical, but clearing it promptly prevents potential sensor damage.

Check the Pick Roller and Separator Roller condition. If these rubber parts are worn, they will cause frequent feed errors.

We recommend a routine cleaning every 5,000 scans to maintain optimal friction and avoid paper dust buildup.