e1-005ScanSnap iX1700

Fujitsu ScanSnap iX1700 Error E1-005: Wi-Fi Fix

The Fujitsu ScanSnap iX1700 error E1-005 signifies a network failure related to wireless settings. This error occurs when the device is unable to handshake with the local wireless network. Quick network troubleshooting usually resolves the connection.

1 views

Common causes

  • 1Incorrect Wi-Fi password.
  • 2Interference with wireless signals.
  • 3DHCP IP address conflict.
  • 4Expired firmware on router.

Solutions

Diagnóstico rápido

Error E1-005 indicates connection loss. Confirm your local network is stable by checking other devices in the same room.

Solución paso a paso

  1. Restart your router.
  2. Verify the Wi-Fi signal strength on the scanner LCD.
  3. Run the ScanSnap Home network diagnosis.
  4. Reset credentials if needed.

Prevención y mantenimiento

Assign a static IP to the device to prevent connection drops. Ensure 2.4GHz coverage is robust in the scanning area.

Cuándo llamar a un técnico

If neither Wi-Fi nor USB works, the main interface board may be faulty.

Ficha técnica del equipo

  • Technology: Document scanner.
  • Speed: 40 ppm.
  • Connectivity: Dual-band Wi-Fi, USB.
  • Capacity: 80-sheet ADF.
  • Consumible: FI-700R Roller Kit.
  • Use case: Business.
  • Official drivers / firmware

Steps to follow

  1. 1

    Router Restart

    Restart your Wi-Fi router to clear IP conflicts.

  2. 2

    Check SSID

    Verify the scanner is on the same 2.4GHz network.

  3. 3

    Reconfigure

    Run the network wizard in ScanSnap Home.

Frequently asked questions

This error means the scanner has failed to authenticate with the configured wireless network.

Usually, a simple power cycle of the router is enough to resolve communication errors.

It uses the FI-700R roller kit, regardless of network connectivity.

Assign a static IP address to the scanner to avoid routing conflicts.